PENGATURAN KECEPATAN MOTOR SIX STEP BLDC DENGAN MENGGUNAKAN KONTROL FUZZY LOGIC

Maher Zakharia Octo Putra, Iradiratu Diah Pramana K

Abstract


With the advent of time, the need for a mechanical system electricity efficient, speed ad torque high, and ca re cheap increasing. But motorcycle often used this moment are located motor induction and motor dc have not been able to meet the needs of it. Hence used by motorcycle BLDC to fulfill the need. Brushless dc motor (BLDC) is motorcycle often used in industry. Motor is called BLDC because basically BLDC used dc voltage as the source. Motorcycle brushless dc having efficiency and the power but setting high speed is considered to be difficult to control good constant and varied. Hence needs control that can be used in research is fuzzy logic. To research it controls fuzzy logic having an average settling time 0,007 seconds, rise time 0,002 seconds, steady state error 1% without its while with a settling time 0,006 seconds, rise time 0,003  seconds, steady state error 0,29 %.


Keywords


BLDC, six step, fuzzy logic

Full Text:

PDF

References


Dharmawan, Abe. 2009. Pengendalian Motor Brushless Dc Dengan Metode Pwm Sinusoidal Menggunakan Atmega16. Universitas Indonesia.

Hudaibiy Hibban, Josaphat Pramudijanto, dan Nurlita Gamayanti. 2015. Desain Kontroler Fuzzy

PID Gain Scheduling Untuk Pengaturan Kecepatan Motor DC Tanpa Sikat. Institut Teknologi Sepuluh Nopember.

Mahadian dewangga, Bambang Sujanarko, Satryo Budi Utomo. 2014. Desain Sistem Kontrol Kecepatan Motor Bldc Berbasis Programmable Array Logic Dengan Metode Six Step Commutation. Universitas Jember.

Masudi, Nanang. 2014. Desain Controller Motor Bldc Untuk Meningkatkan Performa ( Daya Output) Sepeda Motor Listrik. Institut Teknologi Sepuluh Nopember.

Microchip Corp. 2002. Brushless DC Motor Control Made Easy.

Nadhif, Mohamad. 2015. Aplikasi Fuzzy Logic Untuk Pengendali Motor Dc Berbasis Mikrokontroler Atmega8535 Dengan Sensor Photodioda. Universitas Negeri Semarang.

Rendy Aditya Wijaya Putra, Eka Firmansyah, F Danang Wijaya. 2014. Metode Six Step Comutation pada Perancangan Rangkian Kendali Sensored Motor Brushless Direct Current. Jurnal Penelitian Teknik Elektro dan Teknik Informasi Volume 1 nomor 1. Universitas Gadjah Mada.

Topaloglu,I. 2013.Closed-Loop Speed Control of PM-BLDC Motor Fed by SixStep Inverter and Effects of Inertia Changes for Desktop CNC Machine


Refbacks

  • There are currently no refbacks.


Copyright (c) 2019 Prosiding Seminakel

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Creative Commons License
Prosiding SEMINAKEL UHT by Fakultas Teknik dan Ilmu Kelautan is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Based on a work at http://prosidingseminakel.hangtuah.ac.id/index.php/ps/index.